
PICVC - ANR HELMET
ACTIVE NOISE REDUCTION (ANR) PICVC HEADSET
Traditional helmets rely on passive attenuation, creating a physical barrier around the ear in an attempt to seal out noise. This works well for high frequency sounds. However, it fails to block the low frequencies of engine noise and other background rumble.
BOSE® electronic Acoustic Noise Cancelling® headset technology actively counters this low frequency noise by generating out-of-phase "anti-noise" in the low frequency range.
Speech signals are not affected – but since background noise is abated, speech intelligibility greatly improves.
Measured by the objective method described in MIL-STD-912, BOSE Acoustic Noise Cancelling technology provides more than 10 decibels better protection than conventional passive hearing protectors. The result is clearer communications, less fatigue and - ultimately - a more effective military operation.
Technical Specifications
- Configuration: Designed for installation in CVC-132 liner, CVC helmet.
- Noise Attenuation: 30 dB overall reduction, A weighted, in armor vehicle noise.
- Replaceable Units: System consists of two (2) earcups (left and right sides), cable assemblies for earshell interconnecting, upper cable to the bailout connector.
- Temperature: Celsius: -40° to +65° operating, -57° to +71° storage
- Farenheit: -40° to +149° operating, -71° to +160° storage
|
| |
| - Frequency Response: 300 Hz to 4500 Hz.
- PTT: 3 position, located on left earshell.
- Input Impendance: 500
- ANR STET Switch: On/Off/Talk-Through switch on the right earshell.
- Sensitivity: 104 dB SPL for a 1 Vrms input.
- Power: 16 to 24 VDC.
- Reliability: >10,000 hours calculated in accordance with MIL-HDBK-217.
- Operating Current: Less than 220 mA peak.
| |
|
|
|
Find out about NAPCO's latest upgrade of the AN/VIC-1:
Please contact us with questions or comments about this site.
© Copyright 2004 NAPCO International LLC. All rights reserved. Reproduction in whole or in part in any form or medium without express written permission of NAPCO International LLC is prohibited.